Dekoputz für Außen
OMBRE DE JOUR
Individual Creation
The different mineral fillers:
solid silver-plated glass particles
stained glass particles
opaque glass particles
glass powder
particles of solar panels
broken natural slate
coloured quartz
natural granite
Note: All of our materials may be mixed up between them.
AREAS OF APPLICATION
Abrasion and weather-resistant. On materials such as concrete,
lime plaster, cement coating, aerated concrete, particle panels,
fiber cement panels, plaster etc ...
For a wall space in restaurants, discos, hotels, living room lounges,
public places etc ...
MATERIAL
It is imperative that the surface is flat, dry, dust-free, crack-free, non friable and free from
any grease.
APPLICATION
Do not mix with any other product. Apply at a temperature higher than + 8 °C.
Mix thoroughly with a slow mixer
or trowel. Mixing time should not exceed two minutes. It is possible to adjust the
consistency with a maximum
of 4% of pure water. Stretch the coating with a stainless steel compaction screed in one go.
Smooth always in the same direction (downwards to upwards) and without leaving a vacuum.
IMPORTANT: During implementation do often rinse out your compaction screed in water.
If you do not use a sub-layer do moisten the surface with a sponge.
Clean tools with water.
CONSUMPTION
According to the porosity of the material from 5.5 to 6.5 kg/m².
Drying time is about 1 to 3 days.
-
zoomen
