Verstärkte Gipskartonplatte, feuerhemmend und wasserabstoßend
SHAFTLINER TYPE X DRYWALL Lafarge

The panel has a specially formulated, non-combustible gypsum core enhanced with glass fibers for strength and additional fire resistance. It is covered with an aqua, water-repellent paper facing on the front, back and long edges. Normal applications do not require finishing treatments, but the aqua surface will accommodate painting or other finishes after proper surface preparation.

Shaftliner Type X panels are only one component of a shaft or area separation wall assembly. For fire-rated resistance, the panels must be used as required in the listed design. See the Lafarge Shaftwall design literature or the Underwriters Laboratories (UL) listings.

Note: Shaftliner Type X should not be used where temperatures exceed 125 degrees F for extended periods or in areas of extreme humidity. Likewise, the board should be protected from exposure to adverse conditions during storage and construction. Shaftliner Type X is not designed for exterior use or for the exposed element of an unlined air-supply duct.

Applications:
Shaftliner Type X is tested in a series of designs for a wide range of ceiling, wall, and enclosure applications. It is used for:
Elevator enclosures
Stairwell enclosures
Mechanical enclosures for electrical, plumbing, HVAC, and venting services
Unlined shafts for return air handling
Area separation fire walls
Corridor ceilings
Soffits