Ziegel-Salzwand PWB4W-12K

für WellnesscentermodularDekor

Salzwand Standardbausatz Weißsalz 50 x 100 cmCan be freely placed on the wall like a pictureEasy assemblyCan be expanded as desiredExact size: Width 50.5 cm x Height 102.3 cm x Depth: 9.1 cmSalzwandsystemThis modular salt wall kit is designed as a hanging system for easy, quick, and clean assembly of a salt wall. The salt bricks are made from pure, translucent rock salt (halite) and are simply hung into a grid on the wall.Weißsalz (White Salt)The color ranges from a very light gray to white with a hint of orange in the white salt. White salt consists of many small, interlocked clear salt crystals, which together appear white due to light refraction, similar to snow.Origin: The white salt comes from the salt mountains in Pakistan.DimensionsThe salt wall system is available in various sizes. The smallest unit measures 50 x 50 cm. Width and height can be selected in steps of 50 cm. The salt wall can be expanded in any direction at any time. Each salt wall consists of two different salt bricks: the main brick (20x10x5 cm) and the half-sized edge brick (10x10x5 cm). The edge brick is only used at the edge. If you want to enlarge your salt wall to the side, the edge bricks are replaced by main bricks, and the edge bricks move to the new edge. The joint between the bricks is about 2.4 mm wide, resulting in slightly larger overall dimensions. The bricks are hung in a bond, as in real masonry. Each brick has four beveled edges on the visible side with a 5 mm wide 45-degree chamfer.Back Plate with CoversThe back plate also serves as a drilling template, making assembly effortless. There are side covers for appearance and a top cover as dust protection. You can mount your own lighting on the back plate. A 2 cm hole serves as a passage for a possible power connection. Here you will find a planning aid with exact dimensions. The clear width, the distance between the back plate and the grid, is 2.7 cm.AssemblyFor each salt wall module, six holders – or only four for the smallest module – are screwed to the wall, to which a carrying grid is attached. Each salt brick has two angled holes into which threaded pins are screwed, allowing the bricks to be hung into the grid. All metal parts are made of rust- and acid-free stainless steel. Light-transmitting foam strips made of Oeko-Tex certified foam are clamped between the bricks as joint fillers. This looks beautiful, especially when the salt wall is backlit, as there are no disturbing shadows. The joints now shine together with the salt bricks in a warm light tone. Unpleasant light flashes for the eyes are also avoided, which occur when looking directly through a joint into a light source.The salt wall kit is designed as a hanging system and can therefore be placed freely on the wall like a picture; a base or raising the salt bricks from the floor is not necessary. Since no adhesive is required, there are also no emissions.The salt wall can be easily dismantled and reassembled elsewhere. The threaded pins should remain in the salt bricks to prevent the salt from breaking out due to repeated screwing in and out.A detailed assembly manual is included. Please watch one of our assembly videos!Required ToolsSpirit level and pencilHammer drill with 6 mm and 8 mm drill bitsCordless screwdriver with 2.5 mm and 5 mm hex bitsNoteRock salt dissolves at a relative humidity of 74 percent. Rooms with higher humidity are therefore unsuitable for a salt wall unless the humidity is reduced accordingly with a dehumidifier.Special formats are possible in a half-brick grid of 10 cm for an additional charge.Technical Specifications / FeaturesSalt color: WhiteWidth: 50 cm (other widths available: 100, 150, 200, 250, 300 cm)Height: 100 cm (other heights available: 50, 150, 200, 250 cm)Backlighting: without (optionally available: SALUX®)Covers with back plate: Plastic white 50x3 mm (optionally without)Weight: 58.8 kgArticle number: PWB4W-12K